Loading Events

« All Events

  • This event has passed.

2023 1/10 Touring Car RC Racing

June 4, 2023 @ 6:00 pm - 8:00 pm

We are once again Kicking Off our 1/10 Touring RC Racing event in Hurst. This is our 2nd year running this event, and we have a new UPDATED lap counter! This event is open to everyone and headed by our Hurst manager Leon. Save the dates and come out for some RC fun!

 

April 16
April 30
May 21
June 4
June 25
July 9
July 23
August 6
August 20
September 10

 

 

1/10th Scale Electric Touring Car Class Rules and Regulations

Revision 2/13/23

 

Introduction

The 1/10th scale electric touring car class has been developed to give the on-road racer the chance to compete against other competitors in “like” cars.  The class will consist of stock chassis and motors which will be described in the rules and regulations outlined in this document.  The Race Director and Organizer will have control of the actual schedule of the individual events, to include rules enforcement and entry fees.

Event Format

  • The events will occur per the scheduled listing on Sundays beginning at 6:00 PM with track preparation to begin at 5:00 PM.
  • The events will consist of 3 qualifying heats which will determine the starting order for the main event(s).
  • The number of qualifying heats will be determined and communicated to the racers during the driver’s meeting before each event.
  • There will be a maximum of 8 cars per heat and main event.
  • In the event that there are more than 8 car entries at any race day, qualifying heats and main events will be divided in to sub divisions, A, B, C etc.
  • Each car shall have a driver and a spotter at the event. If the events have multiple sub division races a driver can also act as a spotter for the next heat event.
  • Each driver will provide their own driver stand which will not exceed 4 feet in height and no more than 7 feet wide.
  • Small ladders are preferred for usage as driver’s stands.
  • Pickup beds can be used as long as they do not take up more than one parking space.
  • An electronic, infrared lap counting system will be in use, requiring each participant to rent a single transponder unit and will be included in the race entry fee.
  • The transponder unit requires to be connected to a receiver port and if the car’s receiver does not have a unused port a “Y” splitter cable can be purchased to provide the extra port needed for the transponder.
  • Transponders will be connected to the car’s body on the inside top using Velcro.
  • Transponders require a clear line of sight to the lap counters receiver unit, thus requiring a clear window or small hole for the transponder to register during the race events.
  • Transponders must be mounted facing out the passenger side window inside the body of the cars using Velcro to mount the transponder to the body of the car – Velcro will be provided.

 

  • The electronic lap counting system will count the number of laps completed for each car as well as the lap times and total times as well as the heat time.
  • There will be 15 minutes only between heats and main events.
  • Any change to the time between heats and main events is at the discretion of the Race Director or Organizer.
  • Each event will have a 5 minute driver’s meeting at 5:45 PM in which the Race Director will go over any rule changes or directives for the day’s event.
  • All participants will be required to register for the event from 5:25 PM to 5:40 PM.
  • A $20.00 entry fee will be required at registration in which $5.00 of the fee is for the rental of the transponder unit.
  • Parking at the event is first come first serve and is preferred that drivers park close to the track, but away from where the driver’s stands will be along the Start/Finish line.
  • If a driver uses their pickup bed as a driver’s stand they must only take up 1 parking spot and only 1 vehicle and be at least 5 feet back from the track boundary.
  • Qualifying will determine the start order for the main event(s) by total track time from the qualifier events.
  • Qualifiers will be 6 minutes in duration.
  • Main event(s) will be 6 minutes in duration.
  • Winner of the main event(s) will be determined from the total laps and first across the finish line after time has been called.

Car Body Requirements

  • Bodies must be of a current or previous touring car from GT1, GT2, GT3 or GT4 categories from actual IMSA or World Sports Car racing.
  • The Race Director can disapprove any body that does not conform to the required GT1, GT2, GT3 or GT4 classes.
  • Bodies must be fully painted with a number and sponsorship decals are preferred.
  • Bodies must have a clear window on the passenger side or a small hole for the lap counter transponder unit to have “line of sight” to the receiver unit.
  • All bodies must be affixed to the cars using the manufacturer’s stock mounting points using body clips.

Car Chassis Requirements

  • The chassis of this class will be the Tamiya TT02 and the Kyosho Fazer MK2 chassis.
  • The TT02R or SRX chassis will be
  • The chassis chosen must be stock, with NO modification parts (except what comes with the TT02R, SRX and Kyosho Fazer MK2 chassis kits).
  • Only the steering servo, ESC (electronic speed control) and motor can be of any type or manufacturer.
  • The only other modification of the chassis can be for the mounting of the lap counter transponder unit.
  • Tires must be the 26mm type with the appropriate plastic wheel.
  • Tires can be foam rubber or standard rubber and can be of any shore desired.
  • The preferred manufacturer for the wheels/tires is Contact or Exceed and can be obtained from the hobby shop.

Car Motor Requirements

  • The motor must be a stock 12 to 28 turn electric motor with NO modifications to the brushes, timing or addition of bearings.
  • The preferred motors are either the 12T Traxxas or Arrma stock electric motors and can be purchased from the local hobby shop.

Transmitter/Receiver Requirements

  • Any 2.4 ghz surface transmitter/receiver will be allowed.
  • Must be a 2.4 ghz system to participate.
  • Stabilization systems are not allowed in the class and must be turned off and will be checked at the beginning of each heat and final race.

Track Construction

  • The track will be defined by the use of straps, plastic cones and/or steel disc plates.
  • The track will be of a different layout each weekend event, but always a road course.
  • The track will be cleaned with a leaf blower each event to prevent foreign objects from penetrating into vital car operational areas.
  • The track will be treated with sugar water on the preferred lines of the track only.

Driver Challenges

  • All challenges from a driver against another driver must be taken to the Race Director immediately.
  • The Race Director will determine the validity of any challenge presented for review.
  • Challenges that are deemed valid could result in disqualification for the day’s races or up to the season’s schedule and will be determined by the Race Director the same day of the challenge, if possible

Conclusion

The purpose of this racing class is to allow racers to participate in a stock type class with each car being equal, focusing on driver’s skills.  It is an excellent class to promote new drivers into a competitive RC car racing environment using electric powered cars.  Our goal is to introduce new participants into competitive RC racing and also promote current racers into a stock electric touring car class.

Hobby Town, the Landlord, nor the Race Director/Organizer are responsible for loss of property or personal injury of any participant or observer.

Details

Date:
June 4, 2023
Time:
6:00 pm - 8:00 pm

Organizer

Hobbytown Hurst
Phone:
(817) 581-1027
View Organizer Website

Venue

Hobbytown Hurst
746 Grapevine Hwy
Hurst, Texas 76054
+ Google Map
Phone:
(817) 581-1027
View Venue Website